photo Banner2_zpslk6i2cow.jpg

Author Topic: Measuring Instructions For The SunSetter Awning  (Read 4748 times)

0 Members and 1 Guest are viewing this topic.

Offline SunSetter Dealer

  • Global Moderator
  • Sr. Member
  • ********************
  • Posts: 121
  • Karma: 1
    • United Window Company
Measuring Instructions For The SunSetter Awning
« on: August 10, 2007, 05:10:25 PM »


1: Measure the height of the wall where you want to install your awning. You need at least 7 ft. 6 in. from your deck or patio floor to the bottom of any roof, eave, or overhang to install the SunSetter Motorized Awning. You can install these awnings up to 10 ft. off the floor.

2.Measure along the side of your home to make sure you have enough width for the width of this listed awning.

3.Measure to make sure that you have at least 8 inches of clear, unobstructed space horizontally along your wall where the awning will attach to your house. (For example, make sure there are no light fixtures, vents, etc. obstructing this space. If your getting the Aluminum Hood you need 9" inches of space)

4.Decide if you’d like the electrical cord for your SunSetter Motorized Awning on the right side or left side looking at the house.